• Lag@lemmy.world
      link
      fedilink
      English
      arrow-up
      19
      ·
      1 year ago

      I was thinking just put a roof over it like a bus stop but I remembered that dust works differently than rain.

      • BlemboTheThird@lemmy.ca
        link
        fedilink
        English
        arrow-up
        5
        ·
        1 year ago

        my tarp-wrapped tower has never once gotten water damage, strangely enough i keep having the replace the cpu tho

        • pancakesyrupyum@kbin.social
          link
          fedilink
          arrow-up
          2
          ·
          1 year ago

          You’re right on the line between this being a joke and someone actually being serious.

          Good job, I’m confused and scared.

          • FuglyDuck@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            I think I’m going to try for a distilled water submerged build. DI is not conductive, right?

            • moody@lemmings.world
              link
              fedilink
              English
              arrow-up
              1
              ·
              1 year ago

              For the sake of the joke, yes. As long as the water remains pure. But once some of the material starts to dissolve into the water, then it’s no longer safe.

    • schmensch@discuss.tchncs.de
      link
      fedilink
      English
      arrow-up
      14
      arrow-down
      1
      ·
      1 year ago

      Depends in how clean your room is. I have a case without dust filters and it’s been running for over a year without any visible dust accumulating.

      Also it’s mounted up high, the further you can get from your floor the cleaner it’ll be.

      • Blastasaurus@lemm.ee
        link
        fedilink
        English
        arrow-up
        5
        ·
        1 year ago

        We sweep our floors every day and vacuum twice a week and I need to clean my tower dust covers every two months.

        • schmensch@discuss.tchncs.de
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          Wow, we only vacuum once a week, that’s it. Maybe its because my tower is on my desk? Or our air is just really clean for some reason…

          • Otakat@reddthat.com
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            It really depends where you live. Some places are very dusty, especially if it’s generally dry and/or windy.

      • dan1101@lemm.ee
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        Getting it off the floor helps a lot. I used to work in an office with carpet, and when we got new PCs I sat the keyboard box on the floor and put the PC on top of that.

    • Pizzasgood@kbin.social
      link
      fedilink
      arrow-up
      3
      ·
      1 year ago

      Might not be that bad. My computer picks up way less dust sitting on my desk surface than it did when I had it on the floor, and I imagine OP’s TV is mounted at least as high as that.

    • dustyData@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      arrow-down
      7
      ·
      1 year ago

      I’m personally worried about the GPU’s heat harming the wires over time. I would’ve mounted it vertically, but I’ve never seen custom extensions that do that.

    • schmensch@discuss.tchncs.de
      link
      fedilink
      English
      arrow-up
      13
      arrow-down
      2
      ·
      1 year ago

      You don’t really need any airflow there. The only thing that gets hot there is memory, but that is already cooled through the PCB (good heat conductor because of the copper), which is cooled by the regular heat sink.

        • Raab@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          Yeah but you can see in the picture the GPU has spacers. The riser cable goes under it and you can see where the rear IO sits that there.is space there.

  • NarrativeBear@lemmy.world
    link
    fedilink
    English
    arrow-up
    9
    ·
    1 year ago

    Very cool, I love how the mounts you created match the ikea aesthetic.

    It would be funny to see Ikea themselves implemented this in their home office line.

    • pianoplant@lemmy.world
      link
      fedilink
      English
      arrow-up
      21
      ·
      1 year ago

      Adds about 1ns (nanosecond, a billionth of a second) per 30cm of riser. So essentially nothing. The only problem happens when some of the signals are lost / attenuated / confused due to interference. As long as it’s a high quality shielded riser it’ll be totally fine.

      I am not fond of LTT so I won’t link their video - but they did a 1.3m PCIE extension and measured no performance impact at all. I’m sure OP is fine.

      • malloc@lemmy.world
        link
        fedilink
        English
        arrow-up
        10
        ·
        1 year ago

        I am not fond of LTT

        Same. Been telling the algo on YT to ignore LTT related videos for awhile now. Used to get recommended like every other day or so. But lately the algo has been deprioritizing their vids. Maybe the latest controversy (employee abuse) had something to do with it

        • pianoplant@lemmy.world
          link
          fedilink
          English
          arrow-up
          9
          arrow-down
          1
          ·
          1 year ago

          He’s just kind of a jerk. Was honestly not all that surprising. I wouldn’t want to work for him… Also I’d never want to trust the reviews or opinions of someone who can’t take criticism well.

    • anonono@lemmy.world
      link
      fedilink
      English
      arrow-up
      6
      ·
      1 year ago

      if the riser is rated for 16x you shouldn’t have any slowdowns.

      you can always check if the card is linked at full speed. if it’s at 16x, then there’s no difference.

  • Sawblade@lemmy.world
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 year ago

    Oooh nice I’ve been wanting to hide my big living room PC, never considered behind the TV.

  • AboyBboy@pawb.social
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    May I ask why you went with mini-itx? There looks to be plenty of room for at least a micro-atx, which would probably be cheaper and have greater expandability. Great job anyhow.

    • govizlora@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      Good question, it’s mererly because I was using an ITX case with those hardwares, but it’s not easy to fit the case behind the TV, so I came up with this solution. If I start new, I might choose ATX instead

  • Madnessx9@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    this looks good, I have saved another peg board 3d print set and plan to do this eventually. I have the board and a printer, its just the time to mess around and try to mount it as its technically custom depending on your PC setup. Just not sure I can manage with the downtime whilst I fiddle with Starfield out and party animals later this month :D

  • Waldhuette@lemmy.world
    link
    fedilink
    English
    arrow-up
    3
    arrow-down
    1
    ·
    edit-2
    1 year ago

    How is the noise with this setup? The CPU cooler looks undersized for the amount of space you have.

    • govizlora@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      CPU fan can get noisy at full load. Could use a better cooler, this one is just what I already have and is okay so far

      • Waldhuette@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        Hows the hotspot temp on the Gpu. I have a 7900xtx with the same cooler design and without airflow the backside gets super hot.

        • govizlora@lemmy.worldOP
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          The backside can get hot. With my previous setup (before mounting it), the backside is facing up exposed to open air, but it’s still very hot at full load. There is no performance issue though. I guess it’s designed like this and it’s totally normal.