• 1 Post
  • 2 Comments
Joined 1 year ago
cake
Cake day: June 24th, 2023

help-circle
  • «your servers “lan” interface has no IPv4 address» ok, so how can that be fixed?

    «Is this another machine in your network already, or is that a typo?» Probably a typo, I just copied it mindlessly :/. Now I have this:

    dhcp-range=192.168.0.25,192.168.0.50,24h
    dhcp-option=option:router,192.168.0.1
    dhcp-option=option:ntp-server,192.168.0.1
    dhcp-option=option:dns-server,192.168.0.1
    dhcp-option=option:netmask,255.255.255.0
    

  • thanks for your response!

    1: the cable was indeed bad (it was brand new, so I wasn’t suspecting it), but something else is still wrong

    2: sorry for just pasting, I’m not really sure how to interpret it client:

    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
        inet 127.0.0.1/8 scope global lo
           valid_lft forever preferred_lft forever
        inet6 ::1/128 scope host 
           valid_lft forever preferred_lft forever
    2: enp0s25: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
        link/ether f0:de:f1:5d:57:0c brd ff:ff:ff:ff:ff:ff
        inet6 fe80::29d:f28a:75a7:b5ab/64 scope link noprefixroute 
           valid_lft forever preferred_lft forever
    3: wlp3s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
        link/ether e2:a8:25:b3:ef:1a brd ff:ff:ff:ff:ff:ff permaddr 00:24:d7:a6:ce:e4
    4: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default 
        link/ether 02:42:0f:11:f5:37 brd ff:ff:ff:ff:ff:ff
        inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0
           valid_lft forever preferred_lft forever
    

    server:

    1: lo: <LOOPBACK,MULTICAST,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
        inet 127.0.0.1/8 scope global lo
           valid_lft forever preferred_lft forever
        inet6 ::1/128 scope host 
           valid_lft forever preferred_lft forever
    3: enp0s25: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
        link/ether 6e:10:39:1a:0b:03 brd ff:ff:ff:ff:ff:ff
        inet6 fe80::2721:8559:a60d:2e65/64 scope link noprefixroute 
           valid_lft forever preferred_lft forever
    4: enp0s29u1u5: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 1000
        link/ether 02:48:11:4d:31:03 brd ff:ff:ff:ff:ff:ff
        inet 192.168.167.220/24 brd 192.168.167.255 scope global dynamic noprefixroute enp0s29u1u5
           valid_lft 3540sec preferred_lft 3540sec
        inet6 fe80::6c7f:73bd:fb6c:bacd/64 scope link noprefixroute 
           valid_lft forever preferred_lft forever
    

    2a: I’m using network manager, it has worked so far. When I try to connect to the wired network manually (normally it does it automatically), nmtui says Could not activate connection: Activation failed: IP configuration could not be reserved (no available address, timeout, etc.). Dnsmasq is running, but I don’t know hot to check where is’t listening (I tried looking it up, but didn’t find anything).

    2b: http://ix.io/4z3X/text

    3: it only shows the dummy docker thing; when I connect to the wi-fi hotspot in my phone, it does appear and I can ping it

    4: I’m not sure, the nftables config is pasted in the original post