The concern for code duplication is valid, but as the article mentioned it is also a while off until the Nova project is mainlined. I honestly never thought of how the work to bring in Rust to mainline may in effect lead to a more complete deprecation of older hardware as we start to change API’s older/unmaintained components aren’t updated. On the flip side, trimming out older stuff might save maintainer work going forward.

They could then potentially end up spending more time testing every possible combination of input then they would spending compiling with a strongly typed language that prevents the invalid syntax from compiling to begin with…

Honestly, this is maybe the most telling about where OP is coming from… If not straight up flame baiting; that or they mistook /r/rustcirclejerk as a serious subreddit

The constraint on memory isn’t on the compiler it is in the available ram and flash on ultra-lowcost/power microcontrollers, use can find some with less than 1KByte of ram, so that 32bit int could have been 4 8bit ints in your electric toothbrush. The packing of bits is space effecient, but not compute effecient and takes several extra clock cycles to finish when run on an 8bit microcontroller. It’s better to store it in the native 8bit word size for these devices. Further more, on more powerful systems using the smaller size can allow you to optimize for SIMD instructions and actually do multiple operations per clock beyond what you could do with the 32bit size.

There are reasons for these types to exist; as was mentioned elsewhere, if you don’t care you can always just use i32 or i64 for your code and be done with it.

Soooo, an int in most architectures is actually signed, usually a 2’s compliment signed 32 bit value; but the spec does not require it to be 32bits, some platforms might use an 8 bit or 16bit value instead (think older 8bit microcontrollers). That’s why they have ‘int32_t’, ‘uint32_t’, etc for C/C++, it just sounds like you haven’t used these number types (check stdint.h). Rust just requires you to use the more explicit number format by default (which I personally prefer because I have had to jump between embedded and Linux development).

The multiple string types are annoying at first, but its probably better to realize that they are more like two types (String and str) with the apperstand (&) ones being references (think pointer in C/C++). A String is like a C++ std::string and a str is more like a C-String (fixed sized array ish of chars).

Enter embedded programming, believe it or not there is a ton of low level C code being written; also, try adding a new protocol for networking, there are many cases where bitstructure matters, I recently wrote a small bit of code for a project that used bit packing so that we could fit inside of a single Ethernet frame so that we didn’t have to deal with fragmentation and the networking overhead it caused.

For context, what is your past programming background and what are you trying to do? While rust is a great language, it may not be the right tool for what you’re trying to do if these are things that you view as unnecessary

A reason to not distribute a library as a binary is for cross platform support, this allows a library to technically be compiled and used in some other platform; with that said, there are assumptions about having the same system calls (or that the library only handles abstract things that don’t hook into a specific architecture), with that said, making cargo smarter and adding in the option to bundle some prebuilt libraries to be pulled for compatible platforms could speed some compile time (at the likely cost of build size, etc).

Distributing a library as source isn’t some weird rust paradigm, take BOOST for example, which is a large library for C++, and is usually distributed as source (but Linux distros may bundle prebuilt binaries; it is generally intended that you will compile it and use it as a shared library), actually a lot of compiled languages distribute their libraries as source, it also allows you to read their source if you need to see exactly how they’re doing something). I don’t believe there is anything preventing someone from using shared libraries in rust, although they do seem to be less common. Another reason to distribute a library as source is for licensing.

The unstable versioning… Ya, that is definitely annoying, and likely tied to the limited resources available for sustainment for various projects. With that said, compared to C/C++ many of these libraries are something that one might role their own or use in house libraries. Now for Tokio… You don’t have to use it for async, although you probably will want to (see: https://blog.poespas.me/posts/2024/05/24/rust-async-std-and-tokio-comparison/), I do wish there was a nice way to depend on a library and substitute some of its dependencies (aka Tokio); with that said, part of the cargo idea is that you don’t view these libraries as part of your source code for review (although, auditors would likely disagree, so acrediting with the inclusion of many in accredited libraries would probably not be fun)

This is so true, heck I’ve even ‘baked’ some custom PCB boards in the oven to do some cheap reflow… Every man belongs in the kitchen, that’s where all the big boy tools are

I believe Mozilla was heavily involved with the creation of Rust, although that has now been transitioned to the Rust Foundation; not sure if that impacts them and/or what other projects they might have

That and a rotating menu likely adds overhead costs as it prevents you from specializing (skills, equipment, and ingredients acquisition)

Rust’s cargo is great, I’d say it would be best to make the switch sooner rather than later once your code base is established. The build system and tooling alone is a great reason to switch

Honestly executives and board members who receive performance bonuses and golden parachutes should carry extra liability, such that these perks can be denied or even clawed back (and used to help the damages) when their decisions have these sort of outcomes. Nothing wrong with making more when things go well, but if you’re going to take a larger piece of the pie, then you need to be prepared to take a smaller piece when things go wrong (aka, cut executive pay before layoffs, etc.).

But you spotted it

🥺

I never received this survey and I fly Southwest specifically because I found their boarding process to be less of a hassle (for a single traveler who doesn’t care where they sit). The only way I could see this being beneficial is if they board people in order of assigned seat in such a way as to optimize time to seat, not the BS boarding that other airlines do to try and maximize price of fair, otherwise they will have lost the whole reason I like(d) to fly them… Their simplier, no bs, boarding process.

P.S. I really don’t get people liking to pidgen hole themselves to a specific spot for any of these things, just makes it easier to inflate the prices later

Darn, I missed it, about halfway down

Do they say what state or are we supposed to just know this is Virginia?

This sounds odd to me, unless you connected to an Ethernet port behind a desk or somehow forced open a network closet… They also might not like it if you disconnected one of the public computers to use its cable/port; otherwise if this was an open and public port, you used it as designed and the librarian probably has watched too many Hollywood hacking movies. I have to admit, I never thought of this as a way to bypass the captive portal (sorta just assumed everyone going through the public network would have to hit it, kinda of the equivalent to having everyone sign a liability waiver).

With that said, I can see some institutions not liking connections that aren’t part of the more traditional/commercial networking (but it doesn’t sound like the library took issue with your traffic, just the librarian didn’t like the PHY link you chose to use). For the SMS thing (I haven’t seen that used in a while, you might be able to use some sort of burner number app if they don’t filter them).

SEEEEEEE!!! I told you

I usually wear deodorant (which generally has an antiperspirant in it), but there are days when I don’t/haven’t; in this limited experience I’ve noticed I would generally smell worse if I haven’t been active. It seems like being up and moving around and sweating from ‘labor’ rather than sitting and sweating (not sure how to word that) is less likely to significantly smell. With all that said, I do try to shower after the gym or when I return inside after working on significant outdoor projects.

P.S., another data point to consider is the individual’s age, as hormone levels (generally tied to age) could also influence perspiration