I’ve been trying to find a linux programming similar to Rufus to flash images of OSes on a thumb drive.

Nothing from the listicles on the internet or the programs in flatpak have worked for me as well as Rufus on Windows.

What have you used that’s worked well? Or, could I run Rufus on my linux machine with WINE?

    • Ghoelian@lemmy.dbzer0.comEnglish
      35·
      6 months ago

      +1 for ventoy. With that you can just flash ventoy on it once, then copy iso’s over to the usb drive without reformatting or reflashing anything.

      • bigmclargehuge@lemmy.world
        7·
        6 months ago

        I’ve had issues with Ventoy on multiple computers with multiple isos. +1 for convenience, -1 for not working 3/4 of the time (for me, I’m sure there are numerous factors).

      • Telorand@reddthat.com
        2·
        6 months ago

        I could never get Ventoy to work. From Windows ISO’s to several versions of Linux, it never got detected as a bootable drive. YMMV

        I like the idea, but it would be great if it was more compatible with different setups.

        • Certainity45@lemmy.ml
          5·
          6 months ago

          Your machine is UEFI, which means your usb stick must be formatted in gpt. Ventoy defaults to mbr which means lagacy bios. It is just 3 mouse click setup.

          Try again. Because it is the best method. I just updated 2,5 years old Ventoy stick without any issues without re-formatting.

          • Telorand@reddthat.com
            1·
            6 months ago

            Hey, thanks! I’ll give that a try. I really like the idea of having a one stick to rule them all, so hopefully that works

        • BearOfaTime@lemm.ee
          3·
          6 months ago

          I’ve found some thumb drives don’t like to boot.

          Ventoy has worked for almost everything. Proxmox doesn’t like it.

          • Telorand@reddthat.com
            2·
            6 months ago

            To be fair, I seem to have a not-so-super superpower to blind pick the USB devices that have the least support for Linux stuff (the aforementioned drives, a WiFi module, etc.).

            • BearOfaTime@lemm.ee
              2·
              6 months ago

              Hahahaha, sorry to hear (but I empathize). I can be a cheap bastard, so I have some shitty thumb drives around. I figure they eventually die anyway, so this stuff isn’t permanent.

              I keep a folder on my server with the tools and noted to rebuild each one. Sometimes I even make an image with the tools, and only leave the ISOs out.

          • f4f4f4f4f4f4f4f4@sopuli.xyzEnglish
            2·
            6 months ago

            I maintain older hardware at work. We have a platform based on a Biostar motherboard with no USB3 ports, and it will not boot from any USB3 drive I’ve tried. Any USB2 drives work fine. Picky, picky! 🤷

    • muhyb@programming.dev
      1·
      6 months ago

      From this list, only Unetbootin can create Windows installation disk. For this, there is also WoeUSB but it’s CLI only.

  • boredsquirrel@slrpnk.net
    23·
    6 months ago

    What?

    Rufus just flashes ISOs to disks. On Linux you can doo that with

    • udisksctl or dd
    • Impression
    • Fedora Media Writer
    • KDE Iso Image writer
    • Balena Etcher

    But you are talking about something completely different and Ventoy does that.

        • qpsLCV5@lemmy.ml
          2·
          6 months ago

          using dd for that is outdated info that everyone keeps blindly parroting with zero understanding why. cat is simpler and works fine.

          note: both cat and dd only work for this when the image is made in a compatible way, my linux isos always work fine but a windows iso didnt and needs a more specific tool.

            • ShortN0te@lemmy.ml
              5·
              6 months ago

              No, cat is not for writing files. Cat is for reading files and directing the data to standard output.

              With “>” you are directing standard output to a file, in this case a blockdevice.

            • tuna@discuss.tchncs.de
              2·
              5 months ago

              /dev/sdX is a file, and both dd, cat can read files in full. You can even try something like zstd to compress it too.

              One of the nice things about dd though is you can see the progress with --status=progress

  • Nibodhika@lemmy.world
    10·
    6 months ago

    Personally I have a USB drive with Ventou and have been using that for a long time.

    But before that I just did a dd. Although I seem to remember someone doing a benchmark and realizing that piping the file was faster. Here’s what I mean by that:

    In bash you have the echo command which prints text:

    echo "Hello"

    Will print Hello.

    In bash you can send the output of a command to a file, so:

    echo "Hello" > hello.txt

    Will write Hello in the hello.txt file.

    In bash you can use the cat command to read files:

    cat hello.txt

    Will print the Hello we wrote in that file earlier.

    In Linux drives are files, so if your USB drive is in /dev/sdb (DON’T JUST BLINDLY COPY THIS) you can create an image of it like so:

    cat /dev/sdb > usb.iso

    But also the devices are writable, so you can flash an image to a disk by doing it the other way around:

    cat image.iso > /dev/sdb
    • Barzaria@lemmy.dbzer0.comEnglish
      4·
      6 months ago

      if is short for input file if is short for output file

      This dd command from the command line is what I use because it is built in and perfectly bare bones for my needs. I like to use the command flag --status=progress to show a status bar while duplicating the data. A word of caution: the dd, or ‘data duplicator’ program is sometimes known as the ‘destroy disk’ program because if you flash the iso file to the wrong disk/drive you can mess up the drive. Use the appropriate level of caution because there is no undo button. You can use the lsblk command to list the block devices on your machine and use the correct device. Quick instructions: use lsblk to list your block devices and locate your flash drive. If the flash drive is mounted (the /sdb/ will have something like /media/files if it is) you can unmount with $umount /path/to/sdb. Once the drive is unmounted you can use the dd program to duplicate the data (iso file) to your drive.

  • owenfromcanada@lemmy.worldEnglish
    4·
    6 months ago

    They obviously don’t have the features that Rufus has, but I’ve ended up using the default USB image writers that come pre-installed (found them on both Mint and Manjaro, probably available on others). If you’re just looking to write an ISO, check to see if you already have one.

  • ulkesh@beehaw.orgEnglish
    4·
    6 months ago

    Ventoy is great as others have said, and probably would do what you want since it has its own installer and is its own bootloader, and can boot isos loaded on the USB drive.

    If you want something that works, in my experience, as well as Rufus, maybe take a look at Balena Etcher, too.

  • Corgana@startrek.website
    3·
    6 months ago

    Balena Etcher is what you want, though AFAIK if you’re making a Windows installer no Linux programs have the convenient options to disable TPM and online account etc that make Rufus so nice.

  • Papamousse@beehaw.org
    3·
    6 months ago

    Well, on MX I’m using “MX Live USB Maker” which can flash any ISO on thumb drive, it’s a built-in tool.

    Now I’m using Ventoy, you just put multiple ISO on the thumb drive and choose it when you boot the USB drive, it’s wonderful, no more “1 OS per drive”, you just take a 32GB USB drive and you can put 10 distro on it.

    https://www.ventoy.net/en/screenshot.html

  • foremanguy@lemmy.ml
    3·
    6 months ago

    The principal alternative to Rufus is Balena etchter, but for me it works 1/5 times. But now I’m using Ventoy and… Just use it, it damn fucking good!

  • tombruzzo@lemm.eeOP
    3·
    6 months ago

    Thanks everyone. I tried ventoy but it didn’t work straight away. I do like the idea of having a list of isos to pick from, but it might take more tweaking to get right.

    I went with the boot loading tool in Fedora since I just wanted to flash mint to do a reinstall on my kids’ laptop

  • psion1369@lemmy.world
    2·
    6 months ago

    My honest recommendation is dd It works, it does it’s job, and doesn’t need to many bells and whistles. My only complaint is that there isn’t an easy way to show progress. But as a background command, it works.

  • HubertManne@moist.catsweat.com
    2·
    6 months ago

    darn I thought this was about my dream thing which would be a flashed boot loader on a drive where you had a folder you could add iso’s and it would automatically give you a list of isos to boot from.