I bought a piece of 1.5 inch stiff foam to try to fix a sag in a bed. It didn’t work but having that thick piece of solid foam around has been a life saver.
Need something flat to put a laptop on? Throw it on the foam. Going to be doing something that requires you to be on your knees for a while? Get the foam!
It went from stupid purchase to something I’d gladly replace if it broke.
Got a bidet as a joke gift for Christmas a few years ago, it has been an absolute game changer. Hate pooping anywhere but home now, I actually feel clean, and use much less toilet paper.
Bidet crew represent
There are dozens of us!
A significant portion of the world uses water to clean after doing their business! It’s just us westerners that are odd about it.
I’m curious what the history behind it is, because I never feel clean if I only wipe. Like if you handled faeces with your hands (for whatever reason) would you be OK with just wiping it off with a paper towel? I sure wouldn’t!
I’m from Italy. It’s full of bidets here.
Va bene! That’s not so much the case here in Sweden.
It kind of boggles the mind though. Setting aside the fact that paper only can’t possibly clean enough, isn’t it also more environmentally friendly to use water? I mean obviously if you pour a bathtub over your butt every time you do your business, then probably not so much, but no one uses that much water.
I use only water from the bidet.
If it wasnt for China, Westerners would also still scratch their asses with shells and stones.
So middle east gave them bidet and China gave them paper. They are so lucky
Hahaha, I had no clue about the shells. You piqued my interest, so I went down the toilet paper history rabbit hole.
I knew that the Romans used communal sponges, I didn’t know they were called tersorium though. Shockingly they spread disease.
Apparently here in the north, the vikings used animal bones, rags, and oyster shells! I’m not surprised we didn’t use paper though, since we didn’t really get paper until the Christians came and brought paper with them, and even then it was only for the educated Christian elite for hundreds of years, up until around the 1200-1300 or so, a good 700 years after people in China wiped their butts with paper!
Toilet paper started being produced here in Sweden in 1882, and the first factory stayed producing until sometime in the early 2000s.
Until the 1900s common folk often used leaves, grass, or the bottom hem of their skirt to clean themselves.
That last bit sounds really gross by modern standards, but given that skirts came in layers, and were really long, they were already covered with the muck of the outside ground so in the grand scheme of things I don’t think it made a very big difference.
According to the manufacturer, the first toilet paper (in Sweden) without wood chips and splinters was released in 1935.
My bidet butt could never handle scraping with oysters or splinterful toilet paper; I’d just scrape my anus off. I can barely use regular toilet paper as it is. People of old were built different hahahaha.
Hahaha, I had no clue about the shells.
He doesn’t know how to use the three seashells!
Demolition Man is a cool movie
(FYI, “there are dozens of us” is an Arrested Development quote. Your questions are definitely valid, but I’m not sure the poster of the comment actually meant much by it, besides the joke.)
It is not a significant portion. Most countries still use TP
Some cursory googling for this turned up a value by researcher Alex Crumbie, though I didn’t find any papers about it. According to them however 30% of the world uses toilet paper, the majority consumer being China. The remaining 70% of the world finds other solutions.
Bidet 2024!!!
baby wipes are the next best thing when you need to go on the go!
Just don’t flush them please. Even the “flushable” kind clog pipes.
deleted by creator
Scooter. Not an electric one. I had a thought once “hey I did ride one in childhood, maybe it can be a bit of nostalgic fun from time to time”. Got myself the cheapest Chinese thing I could find, “no point investing too much into a fad”.
Turned out a scooter is absolute peak urban mobility. Short distances become much shorter. Mid-long distances become short. Granted, for a longer trip somehow the time gains diminish, probably because it’s not as efficient as a bike. But a scooter isn’t a long-hauler. It’s there to zip through an empty mall. It’s there to be folded up in a second and brought into a bus or a shop without being a hassle. It’s like 3-4 kg, not too fast for sidewalks but fast enough for bike roads, extremely easy to stop, doubles as a cart when carrying bags of groceries home.
The chinese one broke after 1 season because I was riding it everywhere. Then I got myself one from a better company, I chose it for small weight and portability. It’s technically children’s thing but I’m well below weight tolerance and also smol so it’s easy to handle. It’s already like a 5th year and whenever it’s not raining or too cold I ride it for shopping, errands, leisure walks, to work… Almost daily.
I love the concept, tried some and would be willing to pay good money for a kick scooter that folds small enough to fit inside or hang off a big backpack, made of some super light material like carbon fibre
I’ve lost hours searching for such a thing online and the closest one is the Valor scooter. but unfortunately it’s ugly and they only make it for kids and I’m a big guy :/
Unfortunately I think we’re not there yet. My one folds into a meter-long bundle of a metal plank with wheels and a metal pipe and while it;s still light and handy it won’t fit in any backpack.
I feel it’s a lack of appetite. very few adults actually want non-electric. I’ve seen a much wider range of electrics, including small form, experimental ones and more :/
When I worked at a small startup, we were moving to a new office and I was asked to help with the buildout. I engaged with the flooring vendor, and he came by one day to drop off a carpet sample. He put it on my desk where my mouse was. It was a rectangle sample of tight knit office carpet, about 18”x22”. When I got back to my desk, I just put my mouse on top of it and started using it as a mouse pad. That was 15 years and 3 companies ago, and I still use it as my mousepad. It’s perfect for the mouse to glide on, soft enough for my wrist to rest on, absorbent of sweat or drink condensation, and large enough I never hit the edge. I will never not use it. It is my mouse carpet, and I love it.
So you’re saying you decline to take this business opportunity which could have made you rich for 15 years just to feel superior to us gaming-spaceage-mousepad plebs with your exclusive desk carpet? How dare you.
How does it feel being superior to all the lame mousepad users?
An oversized poncho cape from the local Goodwill. It was woven in different shades of blue and while I’d never wear it outside, I’ve used it as a wearable blanket at home for a few years now.
I found out it was actually hand made, and costs 300+ USD from the original shop. Bonus points, I feel like a wizard when I wear it
You need to get a matching wizard hat
How do you know you’re not a wizard when you wear it? Have you tried magic?
I bet its fantastic orb pondering wear.
Here’s an odd one my wife and I were just talking about. Some years ago, we were redoing our kitchen and the contractor told us to go buy the kitchen faucet we wanted. We went off, looked at several, and picked the one we thought looked the best with what we were doing.
When the contractor went to install it, he opened the box and a battery pack fell out. I couldn’t for the life of me figure out why a faucet would need batteries. It turned out that you can turn it on and off by touching it anywhere (handle, faucet itself, whatever), you just leave the physical handle open and set where you want it, then you can touch on and off. I thought it was the dumbest thing ever and we’d never use it.
Flash Forward to now and it’s one of the most used conveniences we’ve ever bought. All those times your hands are covered in raw meat or other cooking mess? Just touch the faucet with your elbow. Rinsing a bunch of veggies one at a time? Tap on, tap off. It works flawlessly, unlike those touchless ones at the airport: no delay and works every time. We will never have a kitchen sink without it - my wife wants them for the bathroom.
Does it have a timer safety thing? I know my cat would turn the faucet on and let it flood the house lol.
It does! It runs for minutes without retapping, but not like ten minutes. Never really timed it, and only noticed when I was filling the sink up (it’s a big sink).
I have a Delta branded one. Yea it goes off after a few minutes.
I bought a house with these and didn’t realize it had this feature for like a year (batteries had died). Now I love it. I find myself taping every faucet it use and am annoyed when others don’t turn on.
I actually bought a handfree soap dispenser to go next to it, which is a great combo. Preparing meat or something, I can clean my hands and tap sink with elbow and not worry about cross contamination of everything.
My wife and I always laugh when we catch ourselves tapping other faucets. The soap dispenser sounds like a good idea.
This sounds like something I’d like to get for the shower, but with multiple memory settings, that’s a much different product… Unless I ducted two shower knobs… Oh fuck I feel a project coming on…
We’re about to redo our bathrooms and have started looking at things. One thing we saw that sounded cool are these new thermostatic shower controls: you set them to a temperature and it mixes the water to keep it at that temperature regardless of fluctuations in the hot and cold input. Huh, sounds neat. So we looked at one - over $3000 for just the valve. It doesn’t sound that neat.
Sorry, new?! Unless this is something different from what I’m imagining, thermostatic shower valves have pretty much been the standard in Denmark for all of my life. You can get them for 80 usd (or probably even lower). These are purely mechanical, no need for batteries. I can even find one on US Amazon for around 50 usd (https://www.amazon.com/Bathroom-Thermostatic-Showering-Temperature-Control/dp/B071ZP4ZHN/ref=ex_alt_wg_m?_encoding=UTF8&pd_rd_i=B071ZP4ZHN&psc=1&pd_rd_w=MLPp3&pf_rd_p=e06954f1-ab26-49e7-940f-21fea3d5decd&pf_rd_r=1YGK573NBS6VC329GYD0&pd_rd_wg=PC4iL&pd_rd_r=4415efd7-7117-45ad-8b60-0a1c86e84ef0&content-id=amzn1.sym.e06954f1-ab26-49e7-940f-21fea3d5decd).
Edit: I realise that this sounded more aggressive than it meant it to. I was simply quite surprised! :)
They’ve been code where I am in the u.s. for 20 years.
I needed a “lap desk” or something to put my laptop on, but I wanted it to be low-profile and I could only find a wooden cutting board. Now wooden cutting boards are the only thing I use as lap desks because most actual lap desks I find are super bulky.
I read that as “fap desk” was intrigued then disappointed.
For fap desk you really want silicone
Just cut a hole in the cutting board
That’s how you end up getting a cutting board stuck on your dick.
The “epicurian” brand is perfect for this, or their knockoffs. Its like 1/4" thick (6mm) composite wood. I have one that even fits in my laptop bag - way better than any designated “lap board” I’ve ever found.
An ebike: I don’t even really drive anymore most of the time and it beats the hell out of being stuck in traffic. Getting around is fun again.
I always enjoyed cycling and still ride my MTB, but for getting around town quickly, ebikes are hard to beat.
Same here with the ebike. I live near Seattle and everything I need is within a few minutes of ebike driving
If I can’t ebike, then I uber and it saves me a ton
Feel free to check out !micromobility@lemmy.world
Thank you for the recommendation!
It’s great that Lemmy is already growing with niche communities
can we get some more deets on what you use it for in terms of terrain/altitude/distance/weather?
Seriously considering an ebike to replace a 20 minute car commute (12 miles). There are some 750w used bikes on my local craigslist for ~1-2k USD, but there’s also a super cool dual-motor bike with rear suspension for $3k. Any advice?
I have an ebike I use as my daily commuter for a distance of 11 km each way (6.8 miles) over decently hilly terrain in a windy city as a large man. It still only takes 25 minutes and I charge my battery once a week? Maybe twice if I’m tired and using more boost.
Are you mechanically inclined at all? I purchased a motor conversion kit and a battery to convert my regular bike to ebike. It wasn’t really a difficult process, the hardest part was removing the bottom bracket as it was quite stuck. Took some thinking to get enough leverage without having the tool head chew out the bracket teeth. The rest was relatively plug and play. I was able to get the 500 W motor and 48 V 18 A hour battery for ~$1200 CAD together. I use it to commute to work so I wanted a longer range, if you don’t need as much power or as much range you could do it for cheaper.
I went for a mid drive motor which are more efficient but more expensive than hub drive, if you’re budget conscious you could do a hub drive. From my understanding the hub drive can be more difficult for maintenance (the wheel is a special version, so you need to buy another wheel that works with the hub drive if any issues occur) but I’m no expert.
All of that is a moot point if you don’t already have a bike to use, but you could find a local bike recycle store to get one cheap? Or you could get a new bike and convert that. I had a marin fairfax 2 that I converted over and it works great, haven’t had any issues and I’ve put on a couple thousand kms on it since converting (the display tracks total distance which is handy). I believe the marin was $700ish new from my local store.
https://www.amazon.ca/dp/B083J95GJP?geniuslink=true&psc=1
https://www.amazon.ca/10AH-Electric-Bicycle-Lithinum-Battery/dp/B09C1RP9KV
You could search for other options if you don’t want to support amazon, there are different sites to source the parts from, those were just the first two that I saw.
Here’s a battery from a Canadian company.
https://lunacycle.com/no-drill-battery-mount-kit/
Here’s a mounting bracket for the battery if the bracket seems unsteady or the holes don’t line up like with mine.
This is what I ended up going with. Let me know if you have any questions, I’d be happy to chat about the process more.
All of this is canadian specific because I reposted the meat of it from an older comment, bug I’m sure you could find local alternatives easily enough.
You don’t need much, 500w is enough.
Hell many people can get by with just a cheapo e-scooter.
I got the glasses with 90 degree prisms in them so you can read while laying down. The person on the product page looked like an idiot and thought it would be funny, but I’m on my 3rd pair now
Need testimony from people using this with prescription
A 3D-Printer, I thought I just play around with it and get bored, but you discover so many things that you can do!
The handle on the fridge broke? Print new ones. Need a Flowerpot? Just print one. The router needs a wallmount? I have one ready in a few Hours.
Also I can watch it print for hours, very fascinating and calming.
I got one to print parts for my drones thinking it would be no big deal and it turned in to a hobby in itself.
ventilate my dude. read up on breathing around your 3D printer while its printing. no bueno
Micro plastics making me feel spastic!
E: if you know the song I will give you a Lemon
So noob question - I got a 3D printer relatively recently and have printed a few things with it by downloading files from various websites.
How do you go about making or getting files for your specific custom jobs like these please?
I remember literally watching it for an hour when it was new, it was fascinating.
Wait until you start printing more printers
My wife bought me a Beard Bib as a joke gift after I found it online one day. It’s basically a smaller version of the bibs you wear when getting your hair cut, but with suction cups attached to the bathroom mirror to hold it horizontal and catch stray hairs when using an electric shaver. It looks ridiculous.
I now use it every time I trim my beard, even if my wife still laughs at me every time she sees me in it. Cleaning up all the stray hairs was always a pain in the ass, but this thing does a surprisingly good job at catching 99% of the hair, and I can just brush it all into the trash when I’m done.
Bug zapper flyswatter. Like you can buy at Harbor Freight for a few bucks. It might not be a terribly effective solution to the overall fly population, but in terms of grim-bloody-vengeance-per-dollar, it’s one of the best investments I’ve ever made.
Similarly - i love my bug a salt
Bed sheet suspenders. Dumb problem, stupidly cheap, horribly made, and ABSOLUTELY fixed the friggin sheets being yanked off the corner of the bed twice a night by my tumble-dry-medium sleeper of a spouse.
When they finally broke after almost 2 years I sewed some that’ll last 10 years and I don’t regret them at all.
my tumble-dry-medium sleeper of a spouse.
ROFL! Hahaha… I am gonna call my gf that from now on…
Mechanical keyboard. Almost had no money back then, but wanted to treat myself. It costed 100$, and I regretted it the next morning. Felt like shit, but it was so cool to type on.
After 5 years, this metal-frame keyboard managed to survive many outside gigs, long travels, literal war, and it’s still with me. And I still love typing on it. Sometimes I code just to type. You can guess why I don’t use code completion tools.
Which war?
I got into mechs and bought a bunch of them over a few years, my last one being a ducky with silent reds.
3 years ago I bought a microsoft ergo keyboard and have never looked back. So comfortable.
Now, maybe what I should have bought was an ergodox, but I’m too happy to justify spending $150+ to try it out.
A toy accordion I bought at a truck stop 30 years ago. I blew all of my $30 in vacation spending money on it and everyone said I’d regret it. It ended up kind of joke\prop instrument in all my bands and I still have it and it’s still fun to play.
A burr grinder for coffee beans. I thought coffee snobs were full of shit. I was wrong.
Which one did you get? I’m looking for a good one that won’t break the bank.
Not op but I have the baratza encore. Not exactly cheap but could be affordable if you save up. They’re 150 new on Amazon and go for around 80-100 on ebay here in USA. It’s really good too, especially if you stick with coffee only being a casual hobby or even just want your morning coffee to be good and don’t wanna futz with anything else.
Also an FYI, if you ever do get around to doing espresso, you’ll see a ton of PPL saying you can’t use it for espresso. They are honestly just more enthusiastic about coffee than I am, because I used an online deep cleaning video from Baratza to change the gap between the burrs and it does espresso just fine to my tastes. Like it does well enough that I can’t justify the expense of a better one yet and I’ve had it like 3 years already.
Obv there are better ones, and there are cheaper ones, but th Encore will just last you a long time in your coffee journey, and potentially forever if you only ever want it to do non-espresso grind sizes
